Follow us to set up your extender：
1. Make sure the extender is plugged in and its Power LED turns solid on.
2. On your laptop or smartphone, connect to the extender's network "TP-Link_Extender" or a similar one with "_2.4G" or "_5G" at the end. If you are using a laptop, remember to unplug the Ethernet cable if any.
3. Launch a web browser, and enter http://tplinkrepeater.net or http://192.168.0.254 in the address bar. (You can't use http://192.168.0.254 any more after the extender is connected to your main router.)
Guess you have arrived at the extender's web page! If not, press the extender's Reset button to restore factory default settings and try again. (For instructions of factory resetting, refer to the Quick Installation Guide of the extender.)
For further help or technical support, please visit https://www.tp-link.com/support.